home_Icon.png:>>>

Micro Glass Fiber Pleated Filter Cartridge

Micro Glass Fiber Pleated Filter Cartridge

Outer Diameter: Φ 69 mm(2.75”)
Inner diameter: Φ 33 mm(1.30”)
Length(based on DOE end cap): 10”, 20”, 30”, 40”
Filtration Area(m2): 0.65 m2/10”
Endotoxin: <0.25 EU/mL
Extractable: ≤30 mg/10”

Description

Description

GF (glass fiber) series micro fiber pleated filter cartridge, with strong adsorption, is suitable retained the large particles for pre-filter.

Advantage

Made in 100,000 Class cleaning room
Inner membrane import from Germany and USA
Strong adsorption
Low installation cost and low running cost
Small change of filter cartridge
Wide application, biomedicine, food beverage, electron, water purification, etc
Inside the filter, the impurities are all interception inside the filter core
High pure water flush, no fiber shedding
Multi-layer filter
Large flow and flux
Long service life

Features

Combination of highly adsorptive and mechanical retention for effective clarification
High dirt holding capacity and excellent flow performance
Suitable for the removal of colloids, lipids, protein aggregates and particles
Glass fiber prefilter layer is available for higher dirt holding capacity and longer service life
Good oil resistance, wide chemical compatibility
Economical and ideal choice for protection of final membrane filters

Applications

Clarification of wine, spirits, fruit juices, soft drinks or other beverages
Removal of colloids, lipids and protein aggregates in cell cultures,
ophthalmic, LVPs, serum and other media in bio-pharmaceutical industry
Pre-filtration of fine chemicals, as reagents, inks and paints
Kinds of lubricating oil and hydraulic oil clarification
Oil and other contaminants removal in air/gas filtration

Micro Glass fiber pleated filter cartridges

Specifications

Construction Materials Filter Media GF
Support Layers Polypropylene
Inner core Polypropylene
Outer cage, End Cap Polypropylene
Seal Method Thermal Bonding, No Adhesives
O-rings/ Gaskets Silicone/EPDM/Viton/PTFE/Nitrile
Technical Data Micron Rating 0.45, 1.0, 3.0,5.0, 10 μm
Operating Temperature Normal <60℃ (140 oF)
Max. <85℃ (185 oF)
Normal Flow Direction pressure 4.2 bar (60.9 psi) at 25℃ (77℉ )
Reverse Flow Direction pressure 2.1 bar (30.5 psi) at 25℃ (77℉ )
pH Value Compatibility 1-13
Sterilization In-line steam sterilization is Not recommended, Flush with hot water at 82℃ (180 ℉ ) for 30 minutes
Cartridge Size Outer Diameter Φ 69 mm(2.75”)
Inner diameter Φ 33 mm(1.30”)
Length(based on DOE end cap) 10”, 20”, 30”, 40”
Filtration Area(m2) 0.65 m2/10”
Biosecurity Endotoxin <0.25 EU/mL
Extractable ≤30 mg/10”
Filtration efficiency ≥90%

Ordering Information

Grade Product Micron(μm) End Cap Length O-ring/Gasket Core
F-Food & beverage
P-pharmaceutical
C-chemical
E-electronics
GF 045-0.45
100-1.0
300-3.0
500-5.0
AO-DOE(220)
CN-226/FIN
CF-226/FLAT
BN-222/FIN
BF-222/FLAT
EN-222 three locking ears/Fin
05-5”
10-10”
20-20”
30-30”
40-40”
S-silicone
E-epdm
N-nitrile
T- encapsulated teflon
V-viton
B-temperature resistant
C-SS
e.g.: FGF045AO5SC: Food & beverage+ GF+0.45+DOE+5”+Silicone+SS

We have more than thirty lines for the production of micro-porous Membranes, Syringe filters, Sample vials, Septa and caps, along with Filter Paper, Vacuum pumps and manifolds.

ISO
   Contact Form
YOUR NAME
E-MAIL ADDRESS
ENQUIRE
Congratulations, send successfully