home_Icon.png:>>>

Melt-Blown Filter Cartridges (MBPP)

Melt-Blown Filter Cartridges (MBPP)

Outer Diameter: Φ 63(2.5″)/114(4.5)mm
Inner Diameter: Φ 28mm (1.10″)
Filtration area(m2): 0.4 /10″
Length(based on DOE end cap) 10″, 20″, 30″, 40″, 50″, 60″
pH: 1-13

Category:

Description

Description

Melt-blown filter cartridge (MBPP) are often used in pre-filtration

Advantage

Made in 100,000 class cleaning room
Inner membrane import from Germany and USA
No adhesive
Acid-base
Low installation cost and low running cost
Small change of filter cartridge
Wide application, biomedicine, food beverage, electron, water purification, etc.
Inside the filter, the impurities are all interception inside the filter core
High pure water flush, no fiber shedding
Multi-layer filter
Large flow and flux
Long service life

Features

100% high purity polypropylene (melt blown), no adhesives
High dirt holding capacity and low-pressure loss
Many connections (DOE, 226, 222 end caps) are available
Wide chemical compatibility, various micron ratings (1μm to 100μm)
One piece construction, up to 1524mm (6″)

Applications

Pre-filtration in process water treatment industry
Clarification of wastewater treatment
Bottled water, wine, beer pre-filtration in food and beverage industry
Pre-filtration before RO system in electronics process water
Organic solvents, inks, plating solution, metal cutting, fluids, photoresist filtration

melt blown filter cartridges

Specifications

Construction Materials Filter Media Melt Blown Polypropylene
Inner core PP or core less
Seal Method Thermal Bonding, No Adhesives
O-rings/ Gaskets(only for 222,226,DOE) Silicone/Nitrile/EPDM/Viton/Teflon
Technical Data Micron Rating 1.0,  5.0, 10, 20,  50, 70, 100μm
Normal Operating Temperature  <50℃ (122 oF)
Max. Operating Temperature  <80℃ (176 oF)
Normal flow direction pressure 4.0 bar(58 psi)
Reverse flow direction pressure 2.0 bar(29pci)
Filtration efficiency ≥ 80%
Sterilization Not recommended
Cartridge Size Outer Diameter Φ 63(2.5”)/114(4.5) mm
Inner Diameter Φ 28mm (1.10″)
Filtration area(m2) 0.4 /10”
Length(based on DOE end cap) 10″, 20″, 30″, 40″, 50”, 60”
pH 1-13

Ordering Information

Media material Out Diameter Micron(μm) End Cap Length O-ring/Gasket
MBPP- Melt-blown PP 63-63 mm
114-114 mm
100-1
500-5
1000-10
NIL-CUT END
BN-222/FIN
CN-226/FIN
10-10″
20-20″
30-30″
40-40″
S-silicone
E-EPDM
N-nitrile
V-Viton
e.g.: MBPP63100NIL10S: Melt-blown PP+ 63 mm +1.0μm + cut end +10″ +Silicone

We have more than thirty lines for the production of micro-porous Membranes, Syringe filters, Sample vials, Septa and caps, along with Filter Paper, Vacuum pumps and manifolds.

ISO
   Contact Form
YOUR NAME
E-MAIL ADDRESS
ENQUIRE
Congratulations, send successfully