home_Icon.png:>>>

PES (Polysulfone) Membrane Pleated Filter Cartridges

PES (Polysulfone) Membrane Pleated Filter Cartridges

Outer Diameter: Φ 69 mm(2.75″)
Inner diameter: Φ 33 mm(1.30″)
Length(based on DOE end cap): 5″, 10″, 20″, 30″, 40″
Filtration Area(m2): 0.65 m2/10″
Endotoxin: <0.25 EU/mL
Extractable: ≤30 mg/10″

Description

  Absolute Rate Asymmetric PES(AAPES) Hydrophilic Membrane Pleated Filter Cartridge

Description

The absolute rate AAPES pleated filter cartridge is constructed of imported asymmetric hydrophilic PES membrane media and PP support layers. All construction process are thermally welded without using any glue or adhesives to get low extraction level. It has advantages of absolute rate, high porosity, and homogeneous pore distribution, which make it ideal product for final bacterial removal.

Advantage

Made in 100,000 class cleaning room
Inner membrane import from Germany and USA
Low installation cost and low running cost
Small change of filter cartridge
Wide application, biomedicine, food beverage, electron, water purification, etc.
Inside the filter, the impurities are all interception inside the filter core
High pure water flush, no fiber shedding
Multi-layer filter
Large flow and flux
Long service life

Features

Highly asymmetric PES filter media provides high dirt holding capacity and long life
Absolute rate inherently hydrophilic PES membrane filter for final sterilizing grade filtration
Higher throughput and flow-rate than any other sterilizing grade filter cartridge
Low protein binding, suit for a broad range of pharmaceutical products
Excellent resistance to hydrolysis allows use in ultrapure water(UPW) system
100% integrity test

Applications

Bacterial removal of API, LPV, blood serum, biologicals, buffers, culture media and other pharmaceuticals
Sterile filtration for water, mineral water, wine, beer and other beverages
Ultrapure water and disk, display, multi silicon process water in electronics
Fine chemicals, water process

  Absolute Rate Asymmetric PES (AAPES) Hydrophilic Membrane Pleated Filter Cartridges

Specifications

Construction Materials Filter Media Hydrophilic asymmetric polysulfone membrane
Support Layers Polypropylene
Inner core Polypropylene
Outer cage, End Cap Polypropylene
Seal Method Thermal Bonding, No Adhesives
O-rings/ Gaskets Silicone/EPDM/Viton/PTFE/Nitrile
Technical Data Micron Rating 0.04, 0.1, 0.2, 0.45, 0.65, 0.85, 1.2 μm
Operating Temperature Normal <60℃ (140 oF)
Max. <85℃ (185 oF)
Normal Flow Direction pressure 4.2 bar (60.9 psi) at 25℃ (77℉ )
Reverse Flow Direction pressure 2.1 bar (30.5 psi) at 25℃ (77℉ )
pH Value Compatibility 2-13
Sterilization Flush with hot water at 121±2℃ for
30 minutes, at △ P≤1.0 bar (14.5psi)
Cumulative Time: 8 hours
Cartridge Size Outer Diameter Φ 69 mm(2.75″)
Inner diameter Φ 33 mm(1.30″)
Length(based on DOE end cap) 5″, 10″, 20″, 30″, 40″
Filtration Area(m2) 0.65 m2/10″
Biosecurity Endotoxin <0.25 EU/mL
Extractable ≤30 mg/10″
100% Integrity test
Purified water at 25℃(77 oF)
0.04 μm
0.10 μm
0.20 μm
0.45 μm
0.65 μm
≥3.0 bar (43 psi)
≥2.1 bar (30 psi)
≥3.2 bar (46 psi)
≥2.0 bar (29 psi)
≥1.4 bar (20 psi)

Ordering Information

Grade Product Micron(μm) End Cap Length O-ring/Gasket Core
F-Food & beverage
P-pharmaceutical
C-chemical
E-electronics
AAPES 004-0.04
010-0.1
020-0.2
045-0.45
065-0.65
085-0.85
120-1.2
AO-DOE(220)
CN-226/FIN
CF-226/FLAT
BN-222/FIN
BF-222/FLAT
EN-222 three locking ears/Fin
05-5″
10-10″
20-20″
30-30″
40-40″
S-silicone
E-epdm
N-nitrile
T- encapsulated teflon
V-viton
B-temperature resistant
C-SS
e.g.: FAAPES004AO5SC: Food & beverage+ AAPES+0.04+DOE+5″+Silicone+SS

  Double PES Absolute Rate Asymmetric(DAPES) Membranes Pleated Filter Cartridges

Description

The DAPES pleated filter cartridge are double imported PES membranes and has better dirt holding capacity and long life. All construction process are thermally welded without using any glue or adhesives to get low extraction level. It has advantages of absolute rate, high porosity, and homogeneous pore distribution, which make it ideal product for final bacterial removal.

Features

Double PES Absolute rate asymmetric membranes provides better dirt holding capacity, long life and better bacterial filtration efficiency
Absolute rate inherently hydrophilic PES membrane filter for final sterilizing grade filtration
Higher throughput and flow-rate than any other sterilizing grade filter cartridge
Low protein binding, suit for a broad range of pharmaceutical products
Excellent resistance to hydrolysis allows use in Ultra Pure Water(UPW) system
100% integrity test

Application

Sterile filtration of blood serum, biologicals, buffers, culture media and other pharmaceuticals
Sterile filtration of water, mineral water, wine, beer and other beverages

Specifications

Construction Materials Filter Media Double Hydrophilic asymmetric PES membrane
Support Layers Polypropylene
Inner core Polypropylene
Outer cage, End Cap Polypropylene
Seal Method Thermal Bonding, No Adhesives
O-rings/ Gaskets Silicone/EPDM/Viton/PTFE/Nitrile
Technical Data Micron Rating 0.2+0.1, 0.2+0.2, 0.45+0.2μm(accept private orders)
Operating Temperature Normal <60℃ (140 oF)
Max. <85℃ (185 oF)
Normal Flow Direction pressure 4.2 bar (60.9 psi) at 25℃ (77℉ )
Reverse Flow Direction pressure 2.1 bar (30.5 psi) at 25℃ (77℉ )
pH Value Compatibility 2-13
Sterilization Flush with hot water at 121±2℃ for
30 minutes, at △ P≤1.0 bar (14.5psi)
Cumulative Time: 8 hours
Cartridge Size Outer Diameter Φ 69 mm(2.75″)
Inner diameter Φ 33 mm(1.30″)
Length(based on DOE end cap) 5″, 10″, 20″, 30″, 40″
Filtration Area(m2) 0.65 m2/10″
Biosecurity Endotoxin <0.25 EU/mL
Extractable ≤30 mg/10″
100% Integrity test
Purified water at 25℃(77 oF)
0.2+0.1 μm
0.2+0.2 μm
0.45+0.2 μm
≥4.0 bar (58 psi)
≥3.7 bar (53 psi)
≥3.5 bar (50 psi)

Ordering Information

Grade Product Micron(μm) End Cap Length O-ring/Gasket Core
F-Food & beverage
P-pharmaceutical
C-chemical
E-electronics
DAPES 021-0.2+0.1
022-0.2+0.2
042-0.2+0.45
AO-DOE(220)
CN-226/FIN
CF-226/FLAT
BN-222/FIN
BF-222/FLAT
EN-222 three locking ears/Fin
05-5″
10-10″
20-20″
30-30″
40-40″
S-silicone
E-epdm
N-nitrile
T- encapsulated teflon
V-viton
B-temperature resistant
C-SS
e.g.: FDAPES021AO5SC: Food & beverage+ DAPES+0.2/0.1+DOE+5″+Silicone+SS

  Other PES Membranes Pleated Filter Cartridges

Other PES membranes pleated filter cartridge like those used in high viscosity liquid, has different structure and shape can also be accepted private order.
For these products please contact our sales for details information!

We have more than thirty lines for the production of micro-porous Membranes, Syringe filters, Sample vials, Septa and caps, along with Filter Paper, Vacuum pumps and manifolds.

ISO
   Contact Form
YOUR NAME
E-MAIL ADDRESS
ENQUIRE
Congratulations, send successfully